614-780-0000 4800 Sinclair Rd, Columbus, OH
Mon–Fri 7–6 · Sat 9–6★ 4.7 (558 reviews)
Home / Services / Drivetrain & Differential

Drivetrain & Differential Service in Columbus, OH

The system that gets power to your wheels takes a beating — we keep your axles, CV joints, and differential running smooth and quiet.

Inspect My Drivetrain Call 614-780-0000
Power to the Wheels

Your Drivetrain Connects the Engine to the Road

Axles, CV joints, driveshafts, and differentials transfer your engine's power to the wheels. Worn components cause vibration, clunks, and that telltale clicking on turns.

Blackstone services the complete drivetrain on front-wheel, rear-wheel, all-wheel, and 4WD vehicles. We replace worn CV axles, repair driveshafts, and service differentials with the correct fluid — keeping power flowing smoothly and quietly to your wheels and preventing far costlier failures.

  • CV axles & jointsStop clicking on turns and vibration.
  • Differential serviceFluid service and repair for quiet operation.
  • Driveshaft & U-jointsFix vibration and clunking.
  • AWD & 4WD systemsTransfer-case and 4WD diagnostics.
Inspect My DrivetrainBook an Appointment
Drivetrain and differential service in Columbus, OH
What's Included

Drivetrain Services

Smooth, quiet power delivery to every wheel.

CV Axle Replacement

Fix the classic clicking-on-turns symptom.

Differential Fluid Service

Protect gears and prevent whine.

Driveshaft Repair

Address vibration and U-joint wear.

Transfer Case

4WD/AWD service and repair.

Axle Seal Leaks

Stop differential and axle leaks.

Vibration Diagnosis

Pinpoint driveline vibration sources.

Technician servicing a vehicle drivetrain and differential
Warning Signs

Signs of Drivetrain Trouble

These noises and feelings shouldn't be ignored:

  • Clicking or popping when turning (CV joints)
  • Clunk when shifting into drive or reverse
  • Vibration that increases with speed
  • Whining or humming from underneath
  • Grease on the inside of a tire (torn CV boot)
Inspect My Drivetrain
Why Columbus Trusts Blackstone

Repairs Done Right — and Guaranteed

3yr / 36k Warranty

Nationwide TechNet warranty on parts & labor — covered even when you travel.

ASE-Certified Techs

Factory-level training and dealer-grade tools for every make and model.

Honest, Upfront Quotes

We never start work without your OK — clear written estimates, no surprises.

Free Multi-Point Check

A complimentary digital inspection with photos comes with every visit.

How It Works

Drivetrain & Differential — Step by Step

1

Inspect

Check axles, joints, and differential.

2

Diagnose

Pinpoint the noise or vibration source.

3

Repair

Quality parts and correct fluids.

4

Test

Confirm smooth, quiet operation.

Clicking, Clunking, or Vibrating?

Get your drivetrain inspected before a small issue becomes a major repair.

Drivetrain & Differential FAQs

Common Questions

A clicking sound during turns is the classic symptom of a worn CV joint, usually from a torn CV boot that let grease out and dirt in. It should be replaced before the joint fails completely.

Typically every 30,000–60,000 miles, and more often if you tow or drive in severe conditions. Fresh fluid keeps the gears quiet and prevents expensive differential damage.

Driveline vibration that grows with speed often points to a worn U-joint, an unbalanced driveshaft, or a failing CV axle. We'll diagnose the exact source.

Yes — we service transfer cases, differentials, and the full drivetrain on all-wheel-drive and four-wheel-drive vehicles.

Related Services

You Might Also Need